dvSwitch scripting – Part 5 – Clone/pg to dvPG

An interesting question came up in the PowerCLI Community recently. Jason wanted to use a script from another thread where you could connect a NIC to a specific portgroup while cloning a new guest from a template.

The script didn’t work when the requested portgroup was on a dvSwitch. Enough of a reason for me to have another look.

Continue reading dvSwitch scripting – Part 5 – Clone/pg to dvPG

PowerCLI & vSphere statistics – Part 2 – Come together

The end of my previous post in this series, see PowerCLI & vSphere statistics – Part 1 – The basics, showed how you could get the statistical values for a specific day.

Depending on the point in time for which you request the values, the sampling interval will be different. For example Historical Interval 2 will return values measured over 30 minute intervals. See also the schematic I included in the previous post.

This sample interval is not always what you want for your reports. Suppose you want to always report hourly values and only for working hours during business days. This post will show you how to accomplish that.

Continue reading PowerCLI & vSphere statistics – Part 2 – Come together

PowerCLI & vSphere statistics – Part 1 – The basics

Another popular subject in the VMTN PowerCLI community are statistics. Quite often it’s not entirely clear to the user what is available, how the data can be extracted and how PowerShell/PowerCLI can be used to convert the raw metrics into usable reports.

Before you can fully use all that is available, there are a few key concepts that you should understand.

In this series I will try to explain some common questions.
Continue reading PowerCLI & vSphere statistics – Part 1 – The basics

PowerCLI and the SDK – Part 2 – Prepare the trip

When I publish scripts that use SDK properties or methods, one of the questions that comes back regularly is “Where do you find what to use ?“.
Let me assure you, there are no tricks, optical illusions or black magic involved. I’m simply using the numerous resources that are made available in the VMware Developer community.
Diving into the SDK is like making a big trip, you have to start prepared !
Continue reading PowerCLI and the SDK – Part 2 – Prepare the trip

Events – Part 4 : Who started that VM ?

In a comment on my Events – Part 3 : Auditing VM device changes post, Ian asked if it was possible to report who started a VM.

To take away the suspense, yes that can be done by using the information from two of my earlier post.

Poweredon-report

Since I considered it a bit too long to give the solution in a comment, this post.

Continue reading Events – Part 4 : Who started that VM ?

Events – Part 3 : Auditing VM device changes

In a comment on my Events, Dear Boy, Events – Part 2 post, Sham was wondering if it was possible to find out which device was actually changed on a guest.

Sham was able to find out who did a change, at what time and on which machine, but he also wanted to know what exactly was changed.

Since this is the kind of audit information that I would like to have as well I had a closer look. And luckily the VmReconfiguredEvent object had all the required information in the configSpec property.

Continue reading Events – Part 3 : Auditing VM device changes

RDM & vMotion: inaccessible direct-access LUN

When you try to migrate a guest, that is using one or more RDM disks, you might see this message.

compatibility

The reason this is most probably because the LUN IDs are different on the source and the destination ESX server.

One solution is:

  • stop the guest
  • write down the Physical LUN ID
  • remove the RDM disk(s)
  • vMotion the guest
  • add the RDM disk(s) to the guest based on the Physical LUN ID
  • start the guest

But why do this the hard (manual) way when we have PowerCLI ?

Continue reading RDM & vMotion: inaccessible direct-access LUN

Dutch VMUG event 2009 – The (nearly) lost tapes

During my Dutch VMUG event 2009 presentation there was a technical problem with some of the demo videos I prepared. Luckily an audience member came to the rescue by downloading the excellent VLC Video Player via his cell phone. Thanks again for the assistance 🙂

To make up for this technical mishap, the demo videos with a short explanation.

Continue reading Dutch VMUG event 2009 – The (nearly) lost tapes

Dutch VMUG event 2009 – handy scripts

Today the Dutch VMUG event 2009 took place. It was my first visit but this truly is an amazing event. Lots of knowledgeable and interested visitors.

During my session I showed some small, handy scripts that I use on a regular base. In fact they are stored in my profile.

As promised, here are the scripts.

Continue reading Dutch VMUG event 2009 – handy scripts

Switching to the Paravirtual SCSI Controller

Since ESX 4u1 you have a new SCSI controller type available for your guests, the VMware Paravirtual SCSI Controller.
From several sources we learn that the performance of this controller is better.

See for example the New !! Open unofficial storage performance thread where Lars gave some interesting performance figures.

And in the PowerCLI Community there is a recent thread, called Change SCSI adapter to paravirtual with PowerCLI, where the user asks how he can change his disk adapters.

Reason enough to look how I could use PowerCLI to migrate guests to the VMware Paravirtual SCSI Controller.

Continue reading Switching to the Paravirtual SCSI Controller